So as to ensure that the surface of the plastic product

The moulded parts define the product's shape are called female moulds (also referred to as female moulds), and the shapes define the product's internal shape (such because holes, grooves, etc. Finally, according to the control product size with the design of the parts and determine the mix of parts. 

For injection moulds regarding thermoplastics, the cooling system is primarily which is designed to cool the mould. 32um, and it need to be corrosion-resistant. When designing a moulded part, the overall structure of the cavity must first be determined influenced by the properties of the plastic-type, the geometry of the supplement, dimensional tolerances, and usage needs..

So as to ensure that the surface of the plastic product is smooth plus beautiful and easy to let go, the surface with the plastic features a roughness Ra>0. moulded parts are generally heat treated to increase hardness and are made of corrosion-resistant steel.Each moulded part often features a special name. Plastic melt has a very high pressure when it goes in the cavity, so the moulded parts must be checked for reasonable material range and strength and stiffness.

The second is to decide on the parting surface, the location belonging to the gate and the vent target, and the demoulding method as outlined by the determined structure.

In order to fulfill the mould temperature requirements with the injection process, a temperature control method is required to adjust the temperature on the mould